Hongbao
Automatic Pick-and-Place Equipment for Injection Molding and Glue Injection
| External Dimensions: | Non-standard |
|---|---|
| Equipment Yield: | Above 98% |
| Equipment Efficiency: | 44s±2s |
| OEE: | 95% |
| Equipment Precision: | The entire line uses high-precision servo modules and six-axis robots, with positioning accuracy reaching ±0.002mm |
| Application Range: | The equipment only needs to replace the corresponding conformal plate to be compatible with almost all products, with short line changeover |
Function Introduction
After the injection molding machine completes injection molding, the six-axis robot takes out and cuts off the gate, with no time wasted in between
Cooling Method: Air cooling (fan) and water cooling, good cooling effect
The robotic arm is equipped with a pulling function to ensure that when the half-mold is brushed and enters the injection molding machine for injection, the other half does not interfere
Three-coordinate removal and packaging
Equipment Advantages
1. The equipment uses robotic arms and servo drive modules, with accuracy reaching ±0.06mm
2. The equipment uses high-speed six-axis robots, which are fast, precise, and stable
3. The equipment's production capacity is higher than that of manual operation, saving time and effort
4. Six-axis robots have strong commonality and high programmability, and are widely applicable
5. High product yield, with a first-pass yield of over 98%
6. Saves manpower; the equipment has full automatic signal interaction and requires no manual intervention. Each set of equipment can save 2 people
Previous Page