Hongbao
Automatic picking equipment for injection molding and injection gluing
| External Dimensions: | Non-standard |
|---|---|
| Equipment Yield: | Above 98% |
| Equipment Efficiency: | 44s±2s |
| OEE: | 95% |
| Equipment Precision: | The entire line uses high-precision servo modules and six-axis robots, with positioning accuracy up to ±0.002mm |
| Application Range: | The equipment only needs to replace the corresponding forming plate to be compatible with almost all products, with short line changeover |
Function Overview
After injection molding by the injection molding machine, the six-axis robot takes out and cuts off the sprue, without wasting any time in between.
Cooling Method: Air cooling (fan) and water cooling, good cooling effect
The robotic arm is equipped with a pulling distance function, ensuring that when the half-mold is brushed and enters the injection molding machine for injection, the other half does not interfere.
Three-coordinate picking and packing
Equipment Advantages
The equipment uses robotic arms and servo drive modules, with accuracy up to ±0.06mm
The equipment uses high-speed six-axis robots, which are fast, precise, and highly stable
The equipment's production capacity is higher than that of manual operation, saving time and effort
The six-axis robot has strong commonality and high programmability, making it widely applicable
High product yield, with a first-pass yield of over 98%
Saves manpower, the equipment uses fully automatic signal interaction throughout the process, without the need for manual intervention. Each set of equipment can save 2 people.
Previous Page
Next Page