Hongbao
PCBA test board production line
Some processes of the PCBA automated production line:
1. After the production line is powered on, the production line equipment defaults to automatic operation mode and moves under the control of the control unit, bringing the equipment to its preset initial position.
2. When the production line is ready, manually place the assembled PCBA board into the automatic board splitting machine of the production line, press the start button, and the production line starts to run automatically. The board splitting machine splits the assembled PCBA board into individual PCBA boards, sends a completion instruction, and waits for the next action.
3. After waiting for the front-end board splitting machine to send a board splitting completion signal, the robotic arm grabs all the PCBA boards split by the board splitting machine at once, then sends them to the detection position to wait for the detection operation, and the robotic arm returns to the grabbing position to wait for the next board splitting completion signal.
4. After the PCBA board arrives at the detection position, the detection operation is performed. The PCBA board needs to be closely fitted with the detection device to start detecting the quality of the PCBA board. At the same time, the camera performs image processing to detect the components on the PCBA board, judge the quality of the board, and then integrate it with the detection results of the detection device.
5. After the detection is completed, the robotic arm takes out the detected PCBA board, and then makes a conclusion based on the results obtained from the detection device and image processing, judges whether the PCBA board is a good product, sorts the PCBA board onto different conveyors, and completes this process.
Previous Page
Next Page